New World Case, Inc.
|  Ordering Info  | Contact Us  | About Us | Request a Quote |  Additional Resources |  Home Page |

BOOTH SIZE

Tabletops
10' Booths
20' Booths
Islands
Towers/Cabinets
Banner Stands
Self-packing Displays
Literature Racks
Table Covers
Graphic Cases
Carpet Bags

STYLES

Arise
Panel Glide
FeatherLite
Laarhoven
New World Coyote
HopUp System
BigFabric Exhibits
UltraForm
SmartPak Graphic Cases
Orbus Graphic Cases
NWC Graphic Cases
Magicpak/Expand
Set-up
Design Features
Specs
Graphics
Place an Order
Banner Stands
Carpet Bags
Pactiva
ShowMax
ShowStyle

SHIPPING AND CARRYING CASES

www.CustomCases.com

ADDITIONAL CASES

CustomShippingCases.com
Important! Flexibility is important.
The image must be flexible enough to retract easily into the canister.  Laminating both sides with a polyester material is not recommended.  Using 10mil polyester or polycarbonate laminate can make the image too rigid to retract.

WARNING!

The graphic is under constant tension from the Magicpak spring mechanism.  Using an improper adhesive could result in failure of bond between profile bar and graphic, causing the graphic to forcefully retract into the unit.
  1. Turn image with picture side facing down.  Peel back small amount of protective strip on the top bar.
  1. Place top bar against upper edge of image, remove protective strip.  Press firmly.
  1. Turn image & bar over and burnish down bar in insure good contact with adhesive.
  1. Remove white protective strip from leader.  Apply image, picture side up.   Follow blue line.
  1. Apply image, picture side up.  Follow the blue line.
  1. Apply tape over joint on both sides.
  1. Grip graphic & unit firmly with left hand.  Remove pin with right hand.   (Pin stores in slot after completion).
  1. Maintain a tight grip on graphic and gradually feed into roller mechanism.
  1. Continue to maintain a tight grip and feed into roller mechanism.
  1. You're finished!  Your Magicpak is ready to show.
To interchange graphics:
Extend graphic all the way out of the unit and reinsert locking pin.  Remove old graphics from leader.  Use new top bar (you must obtain a new top bar) and repeat installation steps.
 
CLICK HERE for Ordering Information
Returns of stock items will not be accepted after 21 days. A 25% restocking fee will be charged for non-defective returns to be credited to your account. Custom made displays are non-returnable.

Shipping Methods:  UPS Ground Charges are calculated on-line.  For Next Day, 2nd Day, or any other shipping method, please call (888) 883-0107 for availability and costs.
Magicpak Home Design Features Set-Up Graphics Specs Place an Order

New World Case, Inc.

Please contact us for a quote or for more information on our Trade Show Exhibit Booths

New World Case, Inc.
10 River Road
Uxbridge, MA 01569
Telephone - (508) 278-5526
Toll Free - (888) 883-0107
Fax - (508) 278-5432
E-mail: Sales@PortableBooths.com 

We strive for accuracy, but can not be liable for misprints of specs or prices within these pages. Prices subject to change without notice. The statements in this web site are not intended to create any warranty, expressed or implied. New World Case, Inc. reserves the right to change equipment and performance specifications stated herein without notice.