1
Place frame in front of you with chrome hubs down, facing
you. |
2
Grasping two inner hubs, spread arms up and out in a rapid
motion |
3
Frame has three locks that automatically lock if frame is
rapidly opened. |
4
Always check to make sure locks are properly latched. |
5
Unfold connected channel bars. Hold with hanging studs
(two small nailhead) on top. |
6
Align all slots on channel bars' back to the four hubs on
the frame. |
7
Slide top three slots fitting over the hubs on the frame. |
8
Slide bottom part of the strut over the bottom hub of the
frame. |
9
Overview of frame with mounted channel bars. Five channel bars on front, one on each
backside. |
10
Mount panels by flexing into a vertical position, then hooking onto top studs. Do not
Crease! |
11
Detail shows hanging stud and panel attachment. Smooth all magnetic panel edge strips. |
12
Hang end cap panels using front & back channel bars on each end; smooth magnetic edge
strips. |
13
Mount lights by sliding flange on base of light into top slot in strut. |
14
Place lights as shown, using case top if necessary. Adjust lighting direction. |
15
Your pop-up exhibit is now ready to use. Apply graphics, merchandise, and/or images. |
PLEASE NOTE:
Always be aware of your surroundings and allow plenty of space when setting up any pop-up
exhibit. |
|
